RHC PART · FITS R44 · AUTHORIZED ROBINSON HELICOPTER DEALER
KI-4405 O-540 Engine Installation Prov. Kit
Robinson part number KI-4405, O-540 engine installation prov. kit, for the R44. Factory-new from APEX Helicopters, an authorized Robinson service center at Fort Lauderdale Executive (FXE). Send the RFQ and a service specialist confirms price, availability, lead time, and install hours.
- PART NUMBER
- KI-4405
- DESCRIPTION
- O-540 ENGINE INSTL PROV. KIT
- UNIT
- KIT
- FITS
- R44
- CONDITION
- FACTORY NEW
- 2026 LIST PRICERHC price list, effective January 1, 2026
- $6,790.00
List price shown for reference. Call (954) 914-0600 or send the RFQ: availability, lead time, and install hours quoted together, usually the same business day.
What's in this kit
59 items · Robinson Kit Instructions KI-4405, revision DShow the list ▸Hide the list ▾
Every part Robinson packs in KI-4405, in the order of the Kit Instructions. Tap a part number for its page and price. Alternates are supplied only when selected at order.
| ITEM | PART NUMBER | DESCRIPTION | QTY |
|---|---|---|---|
| KI-4405Instr | Kit Instructions | 1 | |
| A141-11 | Washer | 2 | |
| A305-7 | Panel Assembly (small) | 4 | |
| A305-8 | Panel (large) | 4 | |
| A484-3 | Plate | 6 | |
| A701-1.5FT | Aluminum Tape (1-inch wide, 5-ft length) | 1 | |
| A729-31* | Tube | 1 | |
| A785-19 | Hose – Air Duct (magnetos) | 2 | |
| A785-32 | Hose – Air Duct (alternator) | 1 | |
| B161-102-3 | Spirap (1/8-inch diameter, 3-inch length) | 4 | |
| B162-2 | Clipnut | 12 | |
| B173-6 | V-Belt – Alternator (for use with D748-5 or D748-6 alternator. This part will be provided unless alternate part [below] is selected.) | 1 | |
| B173-2 | orV-Belt – Alternator (for use with D729-1 alternator) · supplied instead of the part above when selected | – | |
| B173-3 | orV-Belt – Alternator (for use with D748-1 or D748-2 alternator) · supplied instead of the part above when selected | – | |
| B277-16 | Clamp | 2 | |
| B277-24 | Clamp | 2 | |
| B277-28 | Clamp | 6 | |
| B401-1 | Grommet – Parallel Valve | 12 | |
| C130-9 | Spacer | 2 | |
| C305-12 | Panel – RH (forward) | 1 | |
| C305-13 | Panel Assembly – LH (aft) | 1 | |
| C305-14 | Panel Assembly – RH (aft, large oil cooler) | 1 | |
| C305-15 | Panel Assembly – LH (forward) | 1 | |
| C306-1 | Panel Assembly (upper) | 1 | |
| C306-2 | Panel (lower) | 1 | |
| C308-4 | Cover Assembly – RH (top) | 1 | |
| C308-5 | Cover Assembly – RH (end) | 1 | |
| C309-5 | Panel Assembly (oil cooler) | 1 | |
| C310-1 | Panel Assembly (upper) | 1 | |
| C310-2 | Panel (lower) | 1 | |
| C312-1 | Cover Assembly – LH (cooling system) | 1 | |
| C313-7 | Panel Assembly – LH Aft (without hose) | 1 | |
| C357-1 | Clip – Single Bend ([3] for ignition harness; [1] for LH magneto cooling hose) | 4 | |
| C357-4 | Clip – Double Bend (replaces C357-1 clip for RH magneto cooling hose) | 1 | |
| C449-1 | Cover Assembly (engine, r/h side) | 1 | |
| C449-3 | Cover Assembly (engine, l/h side, with aft battery installation. This part will be provided unless alternate part [below] is selected.) | 1 | |
| C449-1 | orCover Assembly (engine, l/h side, all other battery installations) · supplied instead of the part above when selected | – | |
| C487-1 | Retainer – Straight | 2 | |
| C487-2 | Retainer – Bent | 2 | |
| C653-1 | Rubber Pads - Engine mount | 2 | |
| C653-2 | Rubber Pads - Engine mount | 2 | |
| D664-2 | Strap | 2 | |
| D754-4 | Baffle Assembly – Intercylinder | 1 | |
| D774-13 | Spring | 4 | |
| STD-160 | Lockwasher (Lycoming part number) | 2 | |
| 06B26669** | Gasket (Lycoming part number) | 6 | |
| MS21042L08 | Nut | 118 | |
| MS21919WDG2 | Clamp | 2 | |
| MS21919WDG22 | Clamp | 2 | |
| MS27039C0805 | Screw | 106 | |
| MS27039C0806 | Screw | 73 | |
| MS27039C0807 | Screw | 3 | |
| MS3367-3-9 | Ty-Rap | 10 | |
| MS3367-5-9+ | Ty-Rap (Note: “+” in contents part number indicates 20-qty pack) | 1 | |
| MS3367-7-9+ | Ty-Rap (Note: “+” in contents part number indicates 10-qty pack) | 1 | |
| NAS1149F0332P | Washer | 1 | |
| NAS1149F0432P+ | Washer (Note: “+” in contents part number indicates 20-qty pack) | 2 | |
| NAS1149FN816P+ | Washer (Note: “+” in contents part number indicates 20-qty pack) | 7 | |
| NAS1352-08-8P | Screw – Socket Cap (Kit contents continues on next page) | 5 | |
| NAS1352-3H6P | Screw – Socket Cap | 1 | |
| NAS1352-4H10P | Screw – Socket Cap | 22 | |
| NAS1352-4H14P | Screw – Socket Cap | 2 |
- *Use with C727-2 Breather Tube (0.75-inch diameter). Refer to R44 IPC Figure 71-5. Engines equipped with C728-2 engine air/oil separator assembly require [1] A785-43 hose and [1] A729‑77 tube; order parts separately. To upgrade breather tube installation with air/oil separator installation, order KI-255-2 R44-series Engine Air-Oil Separator Installation Kit.
- **Replaces cork gaskets (if installed) at rocker box cover.
Contents from Robinson Helicopter Company Kit Instructions KI-4405, revision D, 5 October 2022. Open the official Kit Instructions PDF ↗ · Current revisions are listed under Kit Instructions on Robinson's publications page ↗
Kit terms
- Includes all engine cooling panels
- Not required when purchasing an RHC overhauled/exchange engine
- RHC recommends the MT563-1 scroll-to-engine drill jig
- RHC limited parts warranty: 1 year or 1,000 hours, whichever comes first
Illustrated parts catalogs
How ordering works
- Send the RFQ with quantity + aircraft serial
- We quote price, availability + install hours
- Approve and schedule
Aircraft on ground? AOG requests jump the line. Serial effectivity and applicable service bulletins are checked on every quote, by a person.
Related parts
KI-100
Gov Off Caution Light Kit
FITS R22
KI-104-2
Rii 28V Heated Pitot Tube Kit
FITS R44
KI-115
Syringe & Probe For A184 Brg Kit
FITS R22
Not the part you need? Send any Robinson part number, the RFQ takes whole lists.