RHC PART · FITS R22 · AUTHORIZED ROBINSON HELICOPTER DEALER
KI-2203 R22 Beta II Overhaul Kit
Robinson part number KI-2203, R22 beta II overhaul kit, for the R22. Factory-new from APEX Helicopters, an authorized Robinson service center at Fort Lauderdale Executive (FXE). Send the RFQ and a service specialist confirms price, availability, lead time, and install hours.
- PART NUMBER
- KI-2203
- DESCRIPTION
- R22 BETA II OVERHAUL KIT
- UNIT
- EACH
- FITS
- R22
- CONDITION
- FACTORY NEW
- KIT LIST PRICERHC maintenance kit price list, effective January 1, 2026
- $117,000.00
- CORE CHARGERefunded when overhaul cores return to RHC within 9 months of invoice
- $8,350.00
- 2026 TOTAL WITH CORERHC maintenance kit price list, effective January 1, 2026
- $125,350.00
List price shown for reference. Call (954) 914-0600 or send the RFQ: availability, lead time, and install hours quoted together, usually the same business day.
What's in this kit
52 items · Robinson Kit Instructions KI-2203, revision LShow the list ▸Hide the list ▾
Every part Robinson packs in KI-2203, in the order of the Kit Instructions. Tap a part number for its page and price. Alternates are supplied only when selected at order.
| ITEM | PART NUMBER | DESCRIPTION | QTY |
|---|---|---|---|
| KI-2203Instr | Kit Instructions | 1 | |
| A005-14.CS* | Main Rotor Blade & Spindle Assembly (set; requires A005-12 hub assembly) | 1 | |
| A006-6R | Main Rotor Gearbox Assembly · overhaul exchange, core returned | 1 | |
| A007-6 | Fan Shaft Assembly | 1 | |
| A008-4 | Tail Rotor Assembly | 1 | |
| A017-2R | Swashplate Assembly · overhaul exchange, core returned | 1 | |
| A018-1R | Clutch Assembly – Anodized (This part will be provided unless alternate part [below] is selected.) · overhaul exchange, core returned | 1 | |
| A018-2R | orClutch Assembly – Metalized · supplied instead of the part above when selected | – | |
| A031-1 | Tail Rotor Pitch Control | 1 | |
| A051-1R | Clutch Actuator Assembly (This part will be provided unless alternate part [below] is selected.) · overhaul exchange, core returned | 1 | |
| A051-3R | orClutch Actuator Assembly (without A051-2 gearmotor assembly) · supplied instead of the part above when selected | – | |
| A120-1 | Bellcrank | 1 | |
| A121-17 | Push-Pull Tube Assembly | 1 | |
| A169-37** | Muffler with Risers (O-360 engine) | 1 | |
| A189-10 | Nut – Double Lock | 1 | |
| A189-12 | Nut – Double Lock | 2 | |
| A190-2 | V-Belt Set | 1 | |
| A426-6 | Cap – Collective Spring | 1 | |
| A615-1 | Gasket – Carburetor-to-Air Box | 1 | |
| A628-6 | Connector Assembly – Harness | 2 | |
| A747-1 | Nozzle Assembly (gearbox cooling) | 1 | |
| A780-2 | Cable Assembly – Battery Ground (aft battery) | 1 | |
| A780-33 | Cable Assembly – Battery Power (aft battery; this part will be provided unless alternate part [below] is selected) | 1 | |
| A780-32 | orCable Assembly – Battery Power (fwd battery) · supplied instead of the part above when selected | – | |
| A785-1 | Hose – Air (intake) | 1 | |
| A785-6 | Hose – Air (gearbox cooling) | 1 | |
| A785-26*** | Hose – Air (hot air inlet for A057-2 airbox assembly) | 1 | |
| A792-5 | Dual Tachometer | 1 | |
| A947-1 | Flex Plate Assembly – Forward | 1 | |
| A947-2 | Flex Plate Assembly – Intermediate | 1 | |
| A947-3 | Flex Plate Assembly – Aft | 1 | |
| B021-1R | Tail Rotor Gearbox · overhaul exchange, core returned | 1 | |
| B174-1R | Fanwheel Assembly · overhaul exchange, core returned | 1 | |
| B224-3 | Tail Rotor Drive Shaft | 1 | |
| B283-1 | Hose Assembly (fuel system) | 1 | |
| B283-6 | Hose Assembly (fuel system) | 1 | |
| B350-2 | Pin – Spring (fanshaft nut) | 1 | |
| C636-2 | Support (C649-1 oil cooler on O-360 engine) | 1 | |
| F628-8 | Buckle Assembly | 2 | |
| D756-2**** | Bellcrank Assembly (requires compliance with SL-66) | 1 | |
| KI-274-1***** | Governor Controller Upgrade Kit (This kit willl be provided unless alternate part [below] is selected) | 1 | |
| D270-1.CS | orGovernor Controller (Firmware & optional EMU configuration setup) · supplied instead of the part above when selected | – | |
| KI-2207 | A017-1 Swashplate Installation Kit Instructions | 1 | |
| R5167 | A006 Main Rotor Gearbox Crate | 1 | |
| R5171 | A016 Main Rotor Blade Crate | 1 | |
| R7952 | Core Deposits | 1 | |
| AN320-18 | Nut – Fanshaft | 1 | |
| MS16562-15 | Pin – Spring | 1 | |
| MS20002-18 | Washer | 1 | |
| MS24665-372+ | Cotter Pin (Note: “+” in part number indicates 5-qty pack) | 1 | |
| NAS1149F0632P+ | Washer (Note: “+” in part number indicates 20-qty pack) | 1 | |
| NAS1149F1832P | Washer | 3 | |
| NAS630-80 | Bolt – Teeter | 1 | |
| NAS632-82 | Bolt – Coning | 2 | |
| NAS6604-38 | Bolt | 1 | |
| NAS6606H23 | Bolt | 6 |
- *“.CS” suffix indicates Blade & Spindle set was static balanced at the factory.
- **Does not include A169-39 (heater) shroud assembly. Refer to KI-256 for helicopter s/n 4782 & prior, with optional heater installation.
- ***KI-2208 R22 A057-2 Airbox Assembly Installation Kit Instructions is required for helicopter S/N 2571M thru 2664, if not previously accomplished; order separately.
- ****To comply with Service Letter SL-66, substitute KI-218-1B R22 Full Throttle Caution Light Kit Instructions for bellcrank.
- *****Upgrades B286-2 Governor Controller to the new D270-1.CS Governor Controller/Engine Monitoring Unit.
Cores to return
6 overhaul-exchange components · refunded against the kit core chargeShow the list ▸Hide the list ▾
6 overhaul-exchange components ship against the kit core charge. Send the removed cores back to RHC within 9 months of invoice and the charge is refunded.
- A006-6RMain Rotor Gearbox Assembly
- A017-2RSwashplate Assembly
- A018-1RClutch Assembly – Anodized
- A051-1RClutch Actuator Assembly
- B021-1RTail Rotor Gearbox
- B174-1RFanwheel Assembly
If you order an alternate instead of the standard part, it is an exchange component too and its core returns the same way: A018-2R in place of A018-1R and A051-3R in place of A051-1R.
Contents from Robinson Helicopter Company Kit Instructions KI-2203, revision L, 7 February 2025. Open the official Kit Instructions PDF ↗ · Current revisions are listed under Kit Instructions on Robinson's publications page ↗
Kit terms
- Contains overhauled/exchange components and new parts for the R22 Beta II 2200-hour airframe maintenance and inspection
- Bladder fuel tanks must be purchased unless previously installed (proof of installation required)
- All overhaul cores must be returned within nine (9) months from the date of the RHC invoice to receive a refund of the core charge; cores returned after nine months are not refunded
- Aircraft serial number is needed at the time of order placement
- Crating included in the list price
- RHC limited parts warranty: 1 year or 1,000 hours, whichever comes first
Illustrated parts catalogs
How ordering works
- Send the RFQ with quantity + aircraft serial
- We quote price, availability + install hours
- Approve and schedule
Aircraft on ground? AOG requests jump the line. Serial effectivity and applicable service bulletins are checked on every quote, by a person.
Related parts
KI-100
Gov Off Caution Light Kit
FITS R22
KI-104-2
Rii 28V Heated Pitot Tube Kit
FITS R44
KI-115
Syringe & Probe For A184 Brg Kit
FITS R22
Not the part you need? Send any Robinson part number, the RFQ takes whole lists.