Skip to content

Welcome to the new flyrobinson.com

APEX Helicopters

RHC PART · FITS R22 · AUTHORIZED ROBINSON HELICOPTER DEALER

KI-2202 R22 Beta Overhaul Kit

Robinson part number KI-2202, R22 beta overhaul kit, for the R22. Factory-new from APEX Helicopters, an authorized Robinson service center at Fort Lauderdale Executive (FXE). Send the RFQ and a service specialist confirms price, availability, lead time, and install hours.

PART NUMBER
KI-2202
DESCRIPTION
R22 BETA OVERHAUL KIT
UNIT
EACH
FITS
R22
CONDITION
FACTORY NEW
KIT LIST PRICERHC maintenance kit price list, effective January 1, 2026
$117,100.00
CORE CHARGERefunded when overhaul cores return to RHC within 9 months of invoice
$8,350.00
2026 TOTAL WITH CORERHC maintenance kit price list, effective January 1, 2026
$125,450.00

List price shown for reference. Call (954) 914-0600 or send the RFQ: availability, lead time, and install hours quoted together, usually the same business day.

What's in this kit

52 items · Robinson Kit Instructions KI-2202, revision L
Show the list ▸

Every part Robinson packs in KI-2202, in the order of the Kit Instructions. Tap a part number for its page and price. Alternates are supplied only when selected at order.

PART NUMBERDESCRIPTIONQTY
KI-2202InstrKit Instructions1
A005-14.CS*Main Rotor Blade & Spindle Assembly (set; requires A005-12 hub assembly)1
A006-6RMain Rotor Gearbox Assembly · overhaul exchange, core returned1
A007-6Fan Shaft Assembly1
A008-4Tail Rotor Assembly1
A017-2RSwashplate Assembly · overhaul exchange, core returned1
A018-1RClutch Assembly – Anodized (This part will be provided unless alternate part [below] is selected.) · overhaul exchange, core returned1
A018-2RorClutch Assembly – Metalized · supplied instead of the part above when selected–
A031-1Tail Rotor Pitch Control1
A051-1RClutch Actuator Assembly (This part will be provided unless alternate part [below] is selected.) · overhaul exchange, core returned1
A051-3RorClutch Actuator Assembly (without A051-2 gearmotor assembly) · supplied instead of the part above when selected–
A120-1Bellcrank1
A121-17Push-Pull Tube Assembly1
A169-35**Muffler with Risers (O-320 engine)1
A189-10Nut – Double Lock1
A189-12Nut – Double Lock2
A190-2V-Belt Set1
A426-6Cap – Collective Spring1
A615-1Gasket – Carburetor-to-Air Box1
A628-6Connector Assembly – Harness2
A636-2Support (A649-2 or C649-1 oil cooler on O-320 engine)1
A747-1Nozzle Assembly (gearbox cooling)1
A780-2Cable Assembly – Battery Ground (aft battery)1
A780-33Cable Assembly – Battery Power (aft battery; this part will be provided unless alternate part [below] is selected)1
A780-32orCable Assembly – Battery Power (fwd battery) · supplied instead of the part above when selected–
A785-1Hose – Air (intake)1
A785-2Hose – Air (hot air inlet)1
A785-6Hose – Air (gearbox cooling)1
A792-5Dual Tachometer1
A947-1Flex Plate Assembly – Forward1
A947-2Flex Plate Assembly – Intermediate1
A947-3Flex Plate Assembly – Aft1
B021-1RTail Rotor Gearbox · overhaul exchange, core returned1
B174-1RFanwheel Assembly · overhaul exchange, core returned1
B224-1Tail Rotor Drive Shaft1
B283-1Hose Assembly (fuel system)1
B283-2Hose Assembly (fuel system)1
B350-2Pin – Spring (fanshaft nut)1
F628-8Buckle Assembly2
D756-2***Bellcrank Assembly (requires compliance with SL-66)1
KI-274-1****Governor Controller Upgrade Kit (This kit willl be provided unless alternate part [below] is selected)1
D270-1.CSorGovernor Controller (Firmware & optional EMU configuration setup) · supplied instead of the part above when selected–
KI-2207A017-1 Swashplate Installation Kit Instructions1
R5167A006 Main Rotor Gearbox Crate1
R5171A016 Main Rotor Blade Crate1
R7352Core Deposits1
AN320-18Nut – Fanshaft1
MS16562-15Pin – Spring1
MS20002-18Washer1
MS24665-372+Cotter Pin (Note: “+” in part number indicates 5-qty pack)1
NAS1149F0632P+Washer (Note: “+” in part number indicates 20-qty pack)1
NAS1149F1832PWasher3
NAS630-80Bolt – Teeter1
NAS632-82Bolt – Coning2
NAS6604-38Bolt1
NAS6606H23Bolt6
  • *“.CS” suffix indicates Blade & Spindle set was static balanced at the factory.
  • **Does not include A169-39 (heater) shroud assembly. Refer to KI-256 for helicopters with optional heater

Cores to return

6 overhaul-exchange components · refunded against the kit core charge
Show the list ▸

6 overhaul-exchange components ship against the kit core charge. Send the removed cores back to RHC within 9 months of invoice and the charge is refunded.

If you order an alternate instead of the standard part, it is an exchange component too and its core returns the same way: A018-2R in place of A018-1R and A051-3R in place of A051-1R.

Contents from Robinson Helicopter Company Kit Instructions KI-2202, revision L, 7 February 2025. Open the official Kit Instructions PDF ↗ · Current revisions are listed under Kit Instructions on Robinson's publications page ↗

Kit terms

  • Contains overhauled/exchange components and new parts for the R22 Beta 2200-hour airframe maintenance and inspection
  • Bladder fuel tanks must be purchased unless previously installed (proof of installation required)
  • All overhaul cores must be returned within nine (9) months from the date of the RHC invoice to receive a refund of the core charge; cores returned after nine months are not refunded
  • Aircraft serial number is needed at the time of order placement
  • Crating included in the list price
  • RHC limited parts warranty: 1 year or 1,000 hours, whichever comes first

Full guide: R22 overhaul kit guide →

Illustrated parts catalogs

How ordering works

  • Send the RFQ with quantity + aircraft serial
  • We quote price, availability + install hours
  • Approve and schedule

Aircraft on ground? AOG requests jump the line. Serial effectivity and applicable service bulletins are checked on every quote, by a person.

Related parts

Not the part you need? Send any Robinson part number, the RFQ takes whole lists.

Call (954) 914-0600